Online Energy Auditor Certification Training Course
  • HOME
  • PRACTICE EXAMS
    • BPI PRACTICE EXAMS
    • FREE BPI EXAM QUESTIONS
    • HERS PRACTICE EXAMS
  • NEWBIES
    • WHAT DOES IT LOOK LIKE?
    • HOW DO I DO...?
    • HOW TO CHOOSE A BPI TRAINING CENTER
    • STEP-BY-STEP GUIDE
  • STUDY GUIDES
    • BPI WRITTEN EXAM >
      • Section 1 Building Science Fundamentals >
        • 1a. Basic Terms & Definitions >
          • 1. Airflow in Buildings
          • 2. Equipment Efficiencies
          • 3. Power and Energy
          • 4. Effective Leakage Area
          • 5. Area Weighted R-Value
          • 6. Baseload / Seasonal Energy Use
          • 7. Driving Forces (Including Natural and Mechanical)
          • 8. Behavior of Radiation
          • 9. Thermal Resistance / Transmittance: R and U Values
          • 10. Latent / Sensible Heat
          • 11. Total Equivalent Length
          • 12. Dehumidification / Humidification
          • 13. Convert Pressure Units
          • 14. Thermal Bridges
          • 15. Pressure Boundary
          • 16. Stack Effect
          • 17. Exfiltration and Infiltration
          • 18. Natural / Mechanical Ventilation
          • 19. Net Free Area
          • 20. Input & Output Capacity
          • 21. Peak Electrical Demand
          • 22. Permeability and Perm Rating
          • 23. Standby Loss
          • 24. IAQ (indoor air quality): Moisture, CO, Dust
        • 1b. Principals of Energy, Air & Moisture Thermodynamics >
          • 1. Thermodynamics: Conduction, Convection, Radiation, ΔT
          • 2. Factors That Affect Insulation Performance
          • 3. BPI certification online with BPI practice exams and study guides.
          • 4. Heat Gain / Loss
          • 5. Power and Energy
          • 6. Moisture Transport Mechanisms
          • 7. Identify Areas of Highest Relative Humidity
          • 8. Principles of Combustion
        • 1c. Combustion Safety >
          • 1. Combustion Analysis
          • 2. Carbon Monoxide (CO) Testing
          • 3. Combustion Appliance Venting, Draft, Combustion Air & Sizing
          • 4. Understand Combustion Safety Issues
      • Section 2 Buildings and Their Systems >
        • 2a. Building Components >
          • 1. Identify basic duct configurations and components
          • 2. Identify Basic Hydronic Distribution Configurations and Components
          • 3. Identify Basic Structural Components of Residential Construction
          • 4. Thermal Boundaries and Insulation Applications
          • 5. Basic Electrical Components and Safety Considerations
          • 6. Basic Fuel Delivery Systems and Safety Considerations
          • 7. Basic bulk water management components (drainage plumbing gutters sumps etc)
          • 8. Vapor barriers/retarders
          • 9. Radiant Barrier Principles and Installations
          • 10. Understand Fenestration Types and Efficiencies
          • 11. Understand Issues Involved With Basements, Crawlspaces, Slabs, Attics, Attached Garages, Interstitial Cavities, and Bypasses
          • 12. Understand Issues Involved With Ventilation Equipment
          • 13. Understand Basic Heating / Cooling Equipment Components Controls and Operation
          • 14. Understand Basic DHW Equipment Components Controls and Operation
          • 15. Identify Common Mechanical Safety Controls
          • 16. Identify Insulation Types and R-Values
          • 17. Understand Various Mechanical Ventilation Equipment and Strategies: Spot, ERV, HRV
        • 2b. Conservation Strategies >
          • 1. Appropriate Insulation Applications and Installation Based On Existing Conditions
          • 2. Opportunity for ENERGY STAR Lighting and Appliances
          • 3. Identify Duct Sealing Opportunities and Applications
          • 4. Understand Importance of Air Leakage Control and Remediation Procedures
          • 5. Blower Door-Guided Air Sealing Techniques
          • 6. Water Conservation Devices and Strategies
          • 7. Domestic Hot Water (DHW) Conservation Strategies
          • 8. Heating & Cooling Efficiency Applications
          • 9. Proper Use of Modeling to Determine Heating and Cooling Equipment Sizing and Appropriate Energy
          • 10. Understand the Use of Utility History Analysis in Conservation Strategies
          • 11. Appropriate Applications For Sealed Crawlspaces Basements and Attics
          • 12. Identify / Understand High Density Cellulose
          • 13. Appropriate Applications for Fenestration Upgrades Including Modification or Replacement
        • 2c. Comprehensive Building Assessment Process >
          • 1. Determine Areas of Customer Complaints / Concerns in Interview
          • 2. Understand / Recognize Need For Conducting Appropriate Diagnostic Procedures
          • 3. Interaction Between Mechanical Systems, Envelope Systems and Occupant Behavior
        • 2d. Design Considerations >
          • 1. Appropriate Insulation Applications Based On Existing Conditions
          • 2. Understand Fire Codes as Necessary to Apply Home Performance in a Code-Approved Manner
          • 3. Understand / Recognize Building Locations Where Opportunities for Retrofit Materials
          • 4. Understand Climate Specific Concerns
          • 5. Understand Indoor Environment Considerations for the Environmentally Sensitive
          • 6. Understand Impact of Building Orientation, Landscape Drainage, and Grading
          • 7. Opportunity Potential Renewable Energy Applications: Geothermal, Photovoltaic, Wind
          • 8. Understand Impact of Shading on Heating / Cooling Loads
          • 9. Awareness for Solar Gain Reduction / Solar Gain Opportunities
          • 10. Understand Need for Modeling Various Options For Efficiency Upgrades
      • Section 3 Measurement & Verification of Building Performance >
        • Section 3a Measurement & Verification of Building Performance >
          • 1. Air Leakage Test Results
          • 2. Understand Building Shell / Envelope Leakage
          • 3. Apply Fundamental Construction Mathematics and Unit Conversions
          • 4. Calculate Building Tightness Levels (Minimum Ventilation Requirements)
          • 5. Calculate Heating Degree Days and Cooling Degree Days
          • 6. Identify Proper Appliance and Combustion Appliance Venting
          • 7. Ventilation calculations and strategies
          • 8. Proper methods for identifying / testing fuel leaks
          • 9. Blower door setup, accurate measurement and interpretation of results
          • 10. Combustion Appliance Zone (CAZ): depressurization, spillage, draft, Carbon Monoxide (ambient and flue)
          • 11. Carbon Monoxide (CO) evaluation: ambient
          • 12. Proper applications and use of temperature measuring devices
          • 13. Pressure pan and room to room pressure diagnostics
          • 14. Recognize contributing factors to comfort problems
          • 15. Inspect for areas containing moisture or bulk water in undesirable locations
          • 16. Understand and inspect for basic electric safety (e.g. frayed wires, open boxes, etc)
      • Section 4 BPI National Standards & Project Specifications >
        • 1. Understand applicability content and intent of BPI National Standards – Do no harm, make buildings more healthy, comfortable, durable and energy efficient
        • 2. Recognize need for a professional local/state/national codes evaluation
        • 3. Be able to specify appropriate materials and processes needed for building performance projects
      • Section 5 Analyzing Buildings Systems >
        • 1. Recognize need for air sealing measures and their impact on other building systems
        • 2. Recognize need for mechanical equipment improvements
        • 3. Understand blower door use for identifying critical air sealing areas
        • 4. Apply blower door test results and Building Tightness Limit (minimum ventilation requirements) in development of improvement strategies
        • 5. Using combustion analysis and safety testing results to develop appropriate recommendations
        • 6. Determine appropriate method for assessing wall insulation levels
        • 7. Equipment control strategies for maximizing occupant comfort and minimizing energy consumption
      • Section 6 Conduct and Communications >
        • 6a. Conservation strategies
        • 6b. Personal Safety & Work Practices >
          • 1. Locations in which to identify indoor air quality issues
          • 2. Material Safety Data Sheets
          • 3. Isolation procedures for household pollutants
          • 4. Practice building science within your limits of professional competency
          • 5. Precautions when working around chemical biological and other potential hazards
          • 6. Understand role and responsibilities of the building analyst professional
    • BPI FIELD EXAM >
      • How To Put The House Under Worst Case & CAZ
      • What's What? Pa, CFM, CFM50, CAZ, Draft, Room Pressure
      • What To Know In The Attic
      • What To Know In The House
    • BLOWER DOOR TEST >
      • Manometer Setup
    • BPI BUILDING ANALYST STANDARDS >
      • BPI Standards Decoded
  • ESSENTIALS
    • HELP, I HATE MATH!
    • AUDITOR TO CREW COMMUNICATION
    • COMMON AUDITOR / CREW MISTAKES
    • RUN LIKE HELL
    • CONTACT
  • AFTER THE EXAM
    • START A HOME PERFORMANCE BUSINESS
    • FREE ENERGY AUDITOR MINI COURSE
    • RESOURCES
  • NEWSLETTER
  • BLOG

JUMP START YOUR ENERGY AUDIT BUSINESS

Picture

WANT TO LEARN MORE? FILL OUT OUR SURVEY & DAVID WILL CONTACT YOU WITH MORE INFORMATION

    “You have heard the quote, ‘You are the average of the five people that surround you.’ We want the level of just about everyone else in the group to be about the same, or at least have different niches of what they can talk about. You want to make sure that each person has an expertise that other people could use.”
Submit

JOIN A GROUP OF LIKE-MINDED HOME PERFORMANCE PROFESSIONALS TO HELP BUILD BETTER AND STRONGER HOME PERFORMANCE COMPANIES

A mastermind is a small, very focused group of business owners who meet regularly to sharpen and strengthen their business strategies. 

Mastermind format

  • Weekly phone conferences
  • 1 hour duration

First 15 minutes
  • The group goes around sharing their wins from the previous week. Whether it's a new partnership or cleaning off your desk, no victory is too small to share.
“We are always looking forward, and never realize the amazing stuff that we are already accomplishing. So being able to share that lets us all rejoice in each other’s wins. And it is really inspiring.”
30-40 minutes:
  •  Each week, one member takes the "hot seat" with a specific issue they're facing in their business. They send any collateral or examples that can help inform the members about the issue and can email everyone ahead of time. The rest of the group will weigh in on the issue and offer their unique expertise to solve the problem.
“You can bring whatever you want to the hot seat. You talk about it and at the end you usually have some sort of clarity or direction to go in whether it be a resource, something to try, being introduced to a person. That makes a huge difference.”
Final 10-20 minutes: 
The group selects the next member to take the hot seat for the following week. With other's help, the upcoming member reviews their goals for the quarter, so that the group can help them solve a problem that gets them closer to that goal.
“As entrepreneurs, we can get really distracted. We are trying to make sure that our actions actually align with what we want. That is when you see massive progress.”
Master Agenda:

12:00 - Welcome / Agenda
12:05 - Sharing a "win" from the previous week
12:20 - Hot Seat -- One Member answers:
  • What are you working on?
  • What's working for you?
  • Where do you need help?
12:40 - Last Questions
  • Who can help Hot Seat Member with their problems?
12:55 - State goal for next week
1:00 - End

Format and Rules for Participation

  • Each​ meeting will be held on a Friday at 12 pm eastern time for 1 hour. Times may vary depending on groups preference.
  • Private Facebook group for members to connect with each other outside the Mastermind setting.
  • It is expected that each member be present and on time for the meeting. If someone cannot attend, please email the group ahead of time.
  • Everyone will have an opportunity to speak within the framework of the group. It works best if each member participates equally.
  • Everyone is here to support each other. Please keep in mind there will be constructive criticism, but there should be no putting down or criticism of other group members. It should be an open and positive experience for all.
  • It is important to note, the Mastermind is not just for advice, but it becomes a positive place where you can manifest your goals with a group. Every person makes it their intention to support the individual goals and help manifest them.
If can tell you that my entire business changed when I joined the right mastermind group.

About David Byrnes

I own and operate a home performance contracting company in Arizona since 2009. I hire and train our auditors, staff, sales and crew of 9. I do all my own marketing and built the business from nothing to seven figures in 3 years. I believe in the power of focused group efforts to overcome challenges. Here are my website and Linkedin profile links, connect with me and say hi!
Copyright 2023 Building Science Training Center LLC
For Trainers - License BPI Course Material & Slides
Terms and Conditions